Plockmatic BK5010 w/Trim+SquareFold – Morgana Duplo Horizon

Description

Thanks for visiting my listing.
I have for sale a really nice Plockmatic BK5010 Booklet maker. with 1600 cycles on the meter, perhaps newest used unit on the market.
Booklet unit was fully tested - booklets are within hairline square, staple units install staples right in the middle of the spine and square back works smooth. Everything in this machine screams new. I, also removed old factory grease and re-applied new, fresh synthetic Mobil1 grease as well as teflon infused oil where thin lubricant required.
Please note: there is no trim/waste box to catch trimmings, but box from LG paper will do the job.
Some specs for reference only:
BK5010e Production Level Booklet Maker The BK5010e Production Level Booklet Maker is a booklet maker that creates professional quality booklets of up to 30 sheets (or 120 pages) with 20 pound Bond when printed 2-up duplex.
The basic unit creates saddle stitched booklets. Optional features add capability to create booklets with the appearance of bound books and magazines with printable spines.
A flexible booklet-making solution
•Optional features include:
– Trimmer to trim off the "shingle" on the booklets.
– Book fold unit for professional appearance of magazine or book.
– Cover feeder for preprinted color inserts.
• The Book Fold Unit BF5010e provides a unique professional booklet:
– Professional finish similar to a magazine or book.
– Easy to stack.
– The book folder gives the book a square formed spine. The spine is printable and hence the booklet is easy to find on a shelf.
– Booklets are easy to read, as the booklet stays flat when opened.
• Create booklets from any combination of A4, A3, B4, 8.5 in x 11 in, 8.5 in x14 in, 11 in x 17 in, and SRA3 or 12 in x18 in media.
• Booklet maker communicates with host printer or copier to reduce operator tasks. – The booklet maker can receive paper size information from the host to automatically set up the following paper sizes: A3SEF, A4SEF, DLT SEF, LTSE, LGSEF, B4SEF, SRA3 or 12 in x 18 in
• Jam clearance is simplified with the "soft stop" feature that allows sheets to be fed out of the printer and bypass the booklet maker. • Can feed sets of media (versus single sheets) in offline mode.
• Easily docks and undocks from the base printer with the optional rail unit.
• The book folder is environmentally friendly:
– No glue is used and thus no glue odor
– Booklets without glue are more easily recycled
• Capability to handle A3 oversize and 12.6 in x 18 in paper (320 mm x 457.2 mm).
• Booklets can have from 1 to 30 sheets of media. The 30 sheet limit is based on 20 pound bond paper: heavier weight media will lower the total sheet limit
• The user interface is equipped with a job manager where up to 10 customized jobs can be stored at one time.
• Offline capability to produce booklets from other sources.
• BK5010e Production Level Booklet Maker specifications: The main unit creates the folded and saddle stitched booklets.
– Paper sizes supported: 8.1 in x 10.8 in (min) to 12.6 in x 18 in (max)
– Paper weights supported: 16 lb Bond - 80 lb Cover (online mode); up to 172 lb Cover (offline mode)
– Folding specifications: 1-30 sheets (stapled - based on 20 lb. Bond) and 1-2 sheets (nonstapled)
– Dimensions (W x H x D): 55.9 in x 35.4 in x 27.6 in
– Weight: 286.6 lb NA - BT5010e Trimmer Unit (#4004) - Initial NA - BT5010e Trimmer Unit (#4005) - MES EU - BT5010e Trimmer Unit (#5004) - Initial EU - BT5010e Trimmer Unit (#5005) - MES The trimmer unit trims off the excess "page creep" that occurs when multiple sheets are folded. This "creep" is sometimes referred to as the "shingle effect." Trimming significantly adds to the professional finish of a booklet.
• Paper sizes supported: 8.1 in x 10.8 in (min) to 12.6 in x 18 in (max)
• Paper weights supported: 16 lb Bond - 80 lb Cover (online mode) up to 172 lb Cover (offline mode)
• Trim specifications: 0.0394 in (min) to 0.7 in (max); default trim length is 11/64 in • Dime
Offered for local pick-up but I can palletize and assist with shipping arrangements per customer's request. Please keep in mind that I will need 0 of additional materials to prep this unit for shipping.
Unit sells AS-IS but guaranteed to match description given above.
Unit will be shipped on the pallet, crated in plywood enclosure, insured for the sum of purchase. Please allow 3-5 days for packing/crating, we're a small company with limited resources. Please contact me with zip and if you'll need liftgate service info if you need a shipping quote.