-40%
NEW SBC 350 XTREME BARE BLOCK 2-PC REAR SEAL SEMI-FINISH 3.995" BORE 4 BOLT MAIN
$ 580.79
- Description
- Size Guide
Description
This is an ALL NEW Chevy SBC 350 Xtreme 2-pc rear seal SEMI-FINISHED engine block, not seasoned or remanufactured block.Material: Superior iron alloy
Bore: 4.000” unfinished
Max Bore & stroke:
4.185” x 3.875” max recommended
Cam bearing bore ID: SBC - 2.00”
Cam bearings: Special coated, grooved, w/3 oil holes
Cam Bearing O.S. : + .010”, +.020”, +.030”
Cam bearing press: .002”
Cam journal OD: Standard SBC - 1.869”
Cam Plug: 2.375” dia. cup plug
Cylinder Wall Thickness: .275” min @ 4.185” bore
Deck Height: 9.025”
Deck Thickness: .675” min.
Fuel Pump: Mechanical pump provision
Fuel Pump Pushrod: Standard Length
Freeze Plugs:
Screw in freeze plugs
Lifter Bores: SBC .8427” - .8437”
Main bearing size: 2.450” (350)
Main bearing bore: (350) 2.6401” / -.001”
Main Cap Bolts: #1 7/16” (2) 3/8” (2),
#2, #3, #4 7/16” (2) 7/16” splayed (2),
#5 7/16” (2) 3/8” (2)
Main cap press: .005”
Main caps:
Steel - 4 bolt, all 5
Main cap register: Deep stepped register on each side (no need for dowels)
Oil system: Wet Sump - Main Priority Oiling (can use dry sump)
Oil Pump shaft: 350 main = Stock shaft (.481”OD)
Oil Filter: Standard SBC filter, uses 2 bolt filter adapter
Oil Pan: Standard SBC oil pan
Rear Main Seal: 350 main - std 2-PC seal
Starter: Standard SBC
Stud holes, Head: Blind holes
Timing chain/gears: Standard SBC components
Timing Cover: Can use stock cover / Magnesium w/ pump provision avail.
Torque Specs: #1-5 7/16” bolts - 65 ft lbs;
1 & 5 3/8” bolts - 35 ft lbs
Net Weight: 205 lbs @ 4.00” bore
PLEASE NOTE:
WE ONLY OFFER INTERNATIONAL SHIPPING VIA EBAY'S GLOBAL SHIPPING PROGRAM.
5.00 FOR RESIDENTIAL DELIVERY.
TEXAS BUYERS CAN CHOOSE IN-STORE PICK UP
STATE SALES TAXES APPLIED TO TEXAS BUYERS.