GM Performance Parts 602 CT350 Circle Track 350 19431602

Description

POWERFUL, DURABLE AND AFFORDABLE!
Chevrolet Performance’s durable CT350 is the engine budget-conscious racers can depend on for competitive performance and low maintenance. At 350 hp, it is a perfect fit for a large number of short track racers.
It is based on our popular 350 HO high-performance street crate engine and features a strong four-bolt-main block and iron Vortec cylinder heads. A unique dual-pattern camshaft helps deliver more than 300 lb.-ft. of torque between 2,000 and 5,500 rpm – peaking at 396 lb.-ft. at 3,800 rpm. With that much pulling power, you can hold a gear longer, keeping the engine in its sweet spot for quicker laps.
We assemble the CT350 with an 8-quart circle track racing oil pan, balancer, HEI distributor and an aluminum high-rise, dual-plane intake manifold. Add your carburetor, starter, spark plugs, wires and water pump – all available from Chevrolet Performance – and you’ll be ready for the green flag!
TECH SPECS
Part Number:
New P/N 88869602 / Old P/N 19258602
Engine Type:
Chevy Small-Block V-8
Displacement (cu in):
350
Bore x Stroke (in):
4.000 x 3.480
Block (P/N 10105123):
Cast-iron with 4-bolt main caps
Crankshaft (P/N
10243070
):
Nodular iron
Connecting Rods (P/N
10108688
):
Powdered metal steel
Pistons (P/N 88894280):
Hypereutectic aluminum
Intake Manifold (P/N
12366573
):
Dual-plane aluminum
Camshaft Type (P/N
24502476
):
Hydraulic flat tappet
Camshaft Lift (in):
.435 intake / .460 exhaust
Camshaft Duration (@.050 in):
212° intake / 222° exhaust
Cylinder Heads (P/N
12558060
):
Vortec iron; 64cc chambers
Valve Size (in):
1.940 intake / 1.500 exhaust
Compression Ratio:
9.12:1 Nominal
Rocker Arms (P/N
10089648
):
Stamped steel
Rocker Arm Ratio:
1.5:1
Recommended Fuel:
Premium pump
Ignition Timing:
34° Total @ 4,000 rpm
Maximum Recommended rpm:
5,500
Balanced:
External
INSTALLATION NOTES
• Requires addition of carburetor, starter, water pump, plug wires and exhaust system (not included)
• Requires an externally balanced flywheel (not included).
• The 8-quart circle track oil pan is 8 inches deep at the sump. It will clear most GM rear-steer chassis with stock engine location
• For Circle Track Racing only – Not intended for street use
• Circle Track racing engines from Chevrolet Performance include anti-tampering seals installed
NOTE:
Distributor with melonized steel gear MUST be used with long-blocks and Partial engines with steel camshafts, or engine damage will occur.
Chevrolet Performance Racing Crate Engines are excluded from limited warranty.