FTDI USB RS232 to RJ45 Cisco Console Cable for HP Procurve

Description

FTDI USB RS232 to RJ45 Cisco Console Cable for HP Procurve
Item Features :
Brand new and high quality
Good quality with reasonable price
Best replacement for your cracked/damaged/faulted Cable
6FT (1.8m) Cisco USB- RJ45 Console Cable
PN : FTDIRS232
Connect from a USB port on your laptop directly to a Cisco Console Port. No adapters needed.
Fully capable of sending a break key sequence
Embedded FTDI Chip
Connecting Point: ( 1-CTS, 2-DSR, 3-RXD, 4-GND, 5-GND, 6-TXD, 7-DTR, 8-RTS
Support EEPROM, Support Vendor ID re-write, Support Mprog3.5
Support FTDI VCP Driver and D2XX Driver
Upgrading for Cisco DB9 RJ45 Console Cable
Chipset version: CH340
Package Includes :
1 pc x New FTDI USB RS232 to RJ45 console cable Cisco HP Procurve
NOTE: *SORRY! PICK UP IS NOT ALLOWED!*
Kindly compare your original item with the photos provided for the listing to make sure that you are purchasing the correct part. Please be informed that we do not hold any responsibility for damages caused by wrong installation or wrong purchase.
If you have any questions or clarifications regarding the item,please don't hesitate to ask before purchase.
SHIPPING INFORMATION
For
INTERNATIONAL
orders, please be advised that we
cannot
guarantee exact delivery date. It may vary depending on your local customs/post office regulations.
Kindly contact us if you require any further assistance and we'll be glad to assist you.
TERMS AND RETURN POLICY
Change Address
-
If you are requesting to change your address, please let us know ahead of time. Otherwise, your order will be shipped to the address that you provided in your eBay/PayPal record.
Cancelled Transactions
-
We can cancel transactions, just let us know so we can process it immediately. We might provide an RMA number or further instructions if in case the item was already shipped.
Received Wrong Item/Not as Described
- We're humans and we intermittently commit mistakes but we are keen to correct them, in a way that the buyer prefers. If the item received was wrong or not the same as shown in the product listing photos, we will require you to send actual photo/s of the item received, along with its packaging (showing the label on the package). This is our SOP, for us to be certain and for record purposes.
DOA/Damaged Upon Receipt
- We make sure our items are properly packaged before shipping to avoid damages on the item. In case you received a damaged item, which might have been caused by shipping, please send us photos of the received item along with its packaging (showing the label on the package) for us to check and report immediately to our shipping department so they can take further action.
Defective/Incompatible
- We get our items in bulk so there is a little chance that some would be defective. We require you to send us photo/s of the item received and also your original item (for incompatibility issues) so we can compare the items and conduct necessary actions. If you feel like you need to return an item, please let us know the
REASON
so that we can provide RMA instructions.
If any of these did not answer your concern, please contact us through "MY MESSAGES" or "ASK SELLER QUESTIONS"
and we'll be glad to assist.